自動狗飼料餵食器

Abstract

中文摘要 面對低薪所造成生活上的壓力，導致台灣少子化的問題日趨嚴重，而許多家庭選擇領養或購買毛小孩來做陪伴，但在平常生活中白天需要外出工作，這讓我們不禁思考到，應該由誰來供給毛小孩適量的食物呢？於是本組想到若能利用AT89S52微控制器設計程式製作一個能夠自動供應食物之墊子作品即可解決上述所提到的問題，也能使生活更安心、便利。 首先按下按鈕決定延遲幾秒啟動馬達，然後利用紅外線電路感測食物量是否充裕，再由AT89S52判斷要控制馬達的驅動供給食物或是控制蜂鳴器的作響提醒食物不足。最後利用3D列印機製作出整個機構的外型，整體不僅美觀，也比較穩固。而在有了製作自動狗飼料餵食器的想法之後我們按照CDIO的順序進行構思，而我們也是第一次要使用所學設計一個可以用的東西，所以我們也在網上找過很多相關作品的資料，才有了這次專題大致的雛型。有了專題作品的題目後，要開始著手於其功能，從最開始最簡單的只有單純讓飼料會自動出來以及飼料過少會叫，到後來可以自己設定時間讓飼料在想要的時間出來，還可以達到定時的功能。

Abstract Faced with the pressure of life caused by low salary, the problem of Taiwan's declining birthrate is becoming more and more serious. Many families choose to adopt or buy Mao children to accompany them, but in ordinary life, they need to go out to work during the day. We can't help but think, who should supply the right amount of food for the childProcess and method: Use the AT89S52 microcontroller design program. Press the button to delay the start of the motor for a few seconds, then use the infrared circuit to sense whether the amount of food is sufficient, and then the motor of the AT89S52 control motor to supply food or buzzer to remind the food is insufficient. Finally, the 3D printing mechanism is used to make the appearance of the whole mechanism, and the whole is not only beautiful but also relatively stable.After the idea of making an automatic dog feed feeder, we conceived in the order of CDIO, and we are also the first to use what we have learned to design, so we also found it online. The material of many related works has only a rough prototype of this topic. After you have the topic of the special work, you have to start working on its function. From the very beginning, the simplest thing is that the feed will automatically come out and the feed will be too small. Then you can set the time to let the feed come out at the desired time. Timing functions can be achieved.